ISO 9727 Cork Pull Fixture - G1105

This fixture is designed to extract a cork stopper out of a bottle for pull force measurements, in conformance with ISO 9727.

The G1105 accommodates up to 1.5 L bottles, and is compatible with both natural and synthetic stoppers.

To use, load the bottle onto the spring loaded tray. The neck is secured by the upper bracket. Delrin material is used for the surfaces in contact with the bottle, to avoid marring or breaking the sample. Thread the provided corskscrew assembly into the cork, then use the swiveling hook from the force gauge to engage the eye bolt at the end of the cork screw assembly.

Recommended for use with a force gauge and ES30 manual test stand or ESM303 motorized test stand. A column extension is required to accommodate the height of the fixture.

Send an inquiry

Email us

Call us



Data Sheet - all grips User's Guide Solid Models

gallery thumbnail gallery thumbnail gallery thumbnail            

The G1105 fixture is shipped as shown at left, and includes the following accessories:

(1) Base fixture
(1) Corkscrew assembly
(1) G1035 large hook, 5/16-18

(1) G1018-2 swivel adapter, 5/16-18
(1) Test stand mounting hardware



Capacity Weight
200 lbF
[1000 N]
9.5 lb
[4.3 kg]

Model Description US Price
G1105 Cork pull fixture $1,200.00


Note: If using an ESM303 test stand, a minimum 6" column extension is required, due to the height of this fixture. Extensions are required for most other test stands as well.


Force Gauges  |  Torque Gauges  |  Sensors & Indicators  |  Test Stands  |  Systems & Kits  |  Grips & Attachments  |  Accessories  |  Software
Applications Gallery  |  Product Literature  |  
About Mark-10  |  Contact Us  |  Terms of Use