888-MARK-TEN
 

help desk software


 
ESM1500 / ESM750 Motorized Tension / Compression Test Stands
ESM1500S ESM1500 ESM750 ESM750S
1,500 lbF [6.7 kN]   1,500 lbF [6.7 kN]   750 lbF [3.4 kN]   750 lbF [3.4 kN]
14.2 in [360 mm] travel   32 in [813 mm] travel   32 in [813 mm] travel   14.2 in [360 mm] travel
             

ESM1500 and ESM750 single-column force testers are highly configurable solutions for tension and compression measurement applications, with capacities of 1,500 lbF (6.7 kN) and 750 lbF (3.4 kN), respectively. With generous travel and clearance, they are suitable for break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing, and more.

Satisfy various test methods through an intuitive menu with selectable test parameters, such as speed, number of cycles, etc. Up to 50 profiles may be saved and password protected. Crosshead positioning for sample setup is a breeze with available FollowMe®. Using your hand as your guide, push and pull on the load to move the crosshead at a dynamically variable speed.

The stands feature a unique modular controller function platform. Functions such as travel measurement, cycling, etc. are offered individually, accommodating a wide range of budgets and applications.

Collect force and travel data, plot and analyze results, and control test stand motion via MESUR®gauge Plus software. Or, fully control the stand by a PC through a custom application.



Send an inquiry

Email us

Call us
 

Downloads   Hardware and Software Options   In The Box
Gallery Optional Functions Ordering Information
Features   Specifications   Dimensions
 
 

  Video - YouTube Solid Models - ESM750SFG Solid Models - ESM1500SFG
  Video   Solid Models - ESM750SLC     Solid Models - ESM1500SLC
  Data Sheet     Solid Models - ESM750SLC     Solid Models - ESM1500FG
  User's Guide     Solid Models - ESM750FG     Solid Models - ESM1500LC
          Solid Models - ESM750LC   LabVIEW Serial Write / Read VI
 
 

 
gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail
                                         
 
gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail
                                         
 
gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail
               

 
  • Broad force range and clearance dimensions
  • Compatible with load cells and force gauges
  • USB output of force vs. time or force vs. distance
  • Adjustable, removal control panel with intuitive menu navigation
  • Unique modular function platform - select functions as required for the application
  • Password protection of test parameters
  • Stepper motor-driven, producing smooth and quiet operation with no speed variation under load
  • Compact footprint, suitable for crowded workbenches
  • Most electronics are housed in an integrated removeable enclosure, easily accessed for service
 

  Control panel tabletop mounting kit
For applications requiring remote use of the control panel. Features an adjustable viewing angle and a base with thru holes for bench mounting.
 

Data collection & motion control software
Consider MESUR®gauge Plus for force vs. travel or force vs. time data acquisition, plotting, analysis, reporting, as well as motion control. The software coordinates motor start / stop and data acquisition with one click.

Note: MESUR®gauge Plus does not require any optional test stand functions, such as PC Control. If force vs. travel vs. time output is required, order the Travel Indication option. See below section for details.

  Indicators
Choose from three indicators. Consider a Model 7i or 5i to take advantage of all available test stand functions.
  Series R01 force sensors
S-beam load cells for use with any Mark-10 indicator. Capacities from 50 to 2,000 lbF (250 N to 10 kN).
  Series R03 force sensors
Inline force sensors for use with any Mark-10 indicator. Capacities available from 0.25 to 100 lbF (1 to 500 N).
  Load cell hardware kit
Set of mounting hardware to mount any Series R01 load cell up to 2,000 lbF capacity and any Series R03 force sensor. Can also be adapted to other manufacturers' load cells with #10-32, 1/4-28, and 1/2-20 mounting threads. Note that Series R01 and R03 load cell part numbers ending in -1 (ex: MR01-500-1) include mounting hardware for LC test stand models, ex. ESM750LC.
  Force gauges
Choose from several gauge series. Consider a Series 7 or 5 gauge to take advantage of all available test stand functions.
  Base plate, matrix of holes
Features a matrix of #10-32 threaded holes and a 1/2-20 center hole, ideal for custom fixture mounting.
  Base plate, three hole sizes
#10-32, 5/16-18, and 1/2-20 holes are provided, along with an array of four 1/4-28 holes.
  Remote emergency switch
Convenient for when the standard emergency switch is inaccessible, for example if a safety shield is used. Includes an 8’ (2.4 m) cable, and plugs directly into the rear of the test stand. The standard, attached emergency switch remains operational while the remote switch is plugged in.
  Grips and fixtures
Choose from a wide range of tensile and compression grips and fixtures.
  Eye end adapters
Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges.
     
 

Any of the below functions may be selected at time of order or activated in the field via an activation code. A complete options package is also available. The stands are supplied in Demo Mode, a 160-hour time period in which all functions are temporarily enabled.


Feature Part No. Description Requirements
FollowMe™ force-based positioning SF008 Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.  
  • Series 7 or 5 gauge or indicator
Travel indication SF009
Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.  
  • For data output to a PC, a Series 7 or 5 gauge or indicator is required.
Computer control SF010

Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).

This option is not required for MESUR®gauge Plus software.

 
  • Series 7 or 5 gauge or indicator
  • SF009 travel indication
  • For full speed range, consider SF017 and SF018 speed range extensions
Programmable travel limits SF011 The stand stops at or cycles between programmable upper and lower travel distances.  
  • SF009 travel indication option
Overload protection SF012 Protects a force gauge or force sensor against overload. Also compatible with many competitors’ gauges.  
  • Series 7 or 5 gauge or indicator
Auto return SF013 The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.  
  • Reversing at force set point: Series 7 or 5 gauge or indicator
  • Reversing at travel limit: SF011 programmable travel limits option
  • Reversing at break: SF019 break detection option
Cycling / dwell time SF014 Same as auto-return, but programmable up to 99,999 cycles. 
Programmable dwell time at upper and lower limits up to 9,999 seconds.
 
  • Same as auto-return, at the same speed in each direction. Add SF016 for independent up and down speeds.
Independent Up and Down speeds SF016 Individually specify speeds for the up and down directions.  

-

Low speed extension SF017 Extends the standard speed range down to 0.001 in/min (0.02 mm/min).  

-

High speed extension

SF018

SF018-1

ESM1500 / ESM1500S: Extends max speed to 90 in (2,300 mm)/min.

ESM750 / ESM750S: Extends max speed to 60 in (1,525 mm)/min.

 

-

Break detection SF019 Crosshead stops at a programmable drop in force.  
  • Series 7 or 5 gauge or indicator
Loadholding SF020 Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time.  
  • Series 7 or 5 gauge or indicator
  • If a specified time is required, order SF014 cycling / dwell time option
Preload / sample touch SF021 Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, spring, elongation, and other applications.  
  • SF009 travel indication
  • Series 7 or 5 gauge or indicator
Profiles SF022 Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored.   -
Complete options package

SFCOMP (ESM1500 / ESM750)

SFCOMP-1 (ESM1500S / ESM750S)

Includes all functions listed above.
Requires a Series 7 or 5 gauge or indicator.
   

 
  ESM1500 ESM1500S ESM750 ESM750S
Load capacity: 1,500 lbF [6.7 kN] at < 60 in [1,525 mm]/min
1,000 lbF [4.5 kN] at > 60 in [1,525 mm]/min
750 lbF [3.4 kN] at < 35 in [900 mm]/min
500 lbF [2.3 kN] at > 35 in [900 mm]/min
Maximum travel distance: 32.0 in [813 mm] 14.2 in [360 mm] 32.0 in [813 mm] 14.2 in [360 mm]
Standard speed range: 0.5 - 24 in/min [10 - 600 mm/min]
Available speed range: 0.001 - 90 in/min [0.02 - 2,300 mm/min] 0.001 - 60 in/min [0.02 - 1,525 mm/min]
Speed setting accuracy: ±0.2% of setting
Speed variation with load: ±0% [stepper motor driven]
Travel accuracy*: ±0.002 in. per 10 in. [±0.05 mm per 250 mm]
Travel resolution: 0.001 in [0.02 mm]
Limit switch repeatability: ±0.001 in [0.03 mm]
Power: Universal input 80-240 VAC,
50/60 Hz, 450W
Universal input 80-240 VAC,
50/60 Hz, 120 W
Weight: 198 lb [90 kg] 160 lb [72 kg] 185 lb [84 kg] 150 lb [68 kg]
Shipping weight: 248 lb [113 kg] 206 lb [93 kg] 236 lb [107 kg] 196 lb [88 kg]
Warranty: 3 years [see individual statement for further details]
Conformance: CE mark
   
* Because load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance.
   

     
gallery thumbnail  

All test stands are supplied with the following accessories:

(1) AC1047-2 eye end kit
(2) G1088 spanner wrench
(1) Load cell / indicator mounting kit (-LC models)
(1) Force gauge mounting kit (-FG models)
(1) USB cable
(1) Interface cable, gauge/indicator to test stand
(4) Thumb screw for indicator / force gauge
(1) Allen wrench set
(1) Control panel
(1) Control panel mounting bracket with hardware
(1) Power cord
(1) Resource CD

 

Shown at left: Model ESM1500LC


     
Part No. Description US Price
Test Stands
ESM1500LC* Motorized test stand with force sensor / load cell mount, 1,500 lbF, 110V* $6,800.00
ESM1500FG* Motorized test stand with force gauge mount, 1,500 lbF, 110V* $6,800.00
ESM1500SLC* Motorized test stand with force sensor / load cell mount, 1,500 lbF, 110V* $6,300.00
ESM1500SFG* Motorized test stand with force gauge mount, 1,500 lbF, 110V* $6,300.00
ESM750LC* Motorized test stand with force sensor / load cell mount, 750 lbF, 110V* $5,800.00
ESM750FG* Motorized test stand with force gauge mount, 750 lbF, 110V* $5,800.00
ESM750SLC* Motorized test stand with force sensor / load cell mount, 750 lbF, 110V* $5,300.00
ESM750SFG* Motorized test stand with force gauge mount, 750 lbF, 110V* $5,300.00
Optional Hardware
AC1055 Base plate, matrix of threaded holes $125.00
AC1054 Base plate, multiple center hole threads $125.00
AC1057 Force gauge mounting kit (included w/FG models) $450.00
AC1056 Load cell mounting kit (included w/LC models) $450.00
AC1065 Load cell hardware kit for ESM1500 $85.00
AC1074 Remote emergency switch $250.00
09-1089-1 Power cord, 110V US (included with US models) $30.00
09-1089-2 Power cord, 220V EUR (included with "E" models) $30.00
09-1089-3 Power cord, 220V UK (included with "U" models) $30.00
09-1089-4 Power cord, 220V AUS (included with "A" models) $30.00
ESM303-004 Control panel tabletop mounting kit $350.00
Optional Functions
SF008 FollowMe™ force-based dynamic manual positioning $450.00
SF009 Travel indication, with USB output, ESM1500 / ESM750 $1,600.00
SF009-1 Travel indication, with USB output, ESM1500S / ESM750S $1,200.00
SF010 Computer control via USB $950.00
SF011 Programmable travel set points $750.00
SF012 Overload protection $650.00
SF013 Auto return $450.00
SF014 Cycling / dwell time $650.00
SF016 Independent up and down speeds $400.00
SF017 Extended speed range, low $450.00
SF018 Extended speed range, high, ESM1500 / ESM1500S $450.00
SF018-1 Extended speed range, high, ESM750 / ESM750S $450.00
SF019 Break detection $450.00
SF020 Loadholding $650.00
SF021 Preload / sample touch $550.00
SF022 Profiles $750.00
SFCOMP Complete options package, ESM1500 / ESM750 $5,450.00
SFCOMP-1 Complete options package, ESM1500S / ESM750S $5,150.00
 

* Contains a universal power supply (80 - 240V) and power cord with US plug.
Add suffix ‘E’ for Euro plug, ‘U’ for UK plug, or ‘A’ for Australian plug. Ex: ESM1500LCE

Power cords also available for purchase individually.

 

 

LC Models
For use with an indicator and sensor.

 
     
  A B
ESM1500LC 51.35
[1304.3]
8.13 - 40.13
[206.4 - 1019.2]
ESM1500SLC 33.89
[860.9]
8.13 - 22.33
[206.4 - 567.1]
ESM750LC 50.85
[1291.6]
8.13 - 40.13
[206.4 - 1019.2]
ESM750SLC 33.39
[848.1]
8.13 - 22.33
[206.4 - 567.1]
 

FG Models
For use with a force gauge.
 
     
  A B
ESM1500FG 51.35
[1304.3]
5.25 - 37.25
[133.4 - 946.2]
ESM1500SFG 33.89
[860.9]
5.25 - 19.45
[133.4 - 494.0]
ESM750FG 50.85
[1291.6]
5.25 - 37.25
[133.4 - 946.2]
ESM750SFG 33.39
[848.1]
5.25 - 19.45
[133.4 - 494.0]
 

Force Gauges  |  Torque Gauges  |  Sensors & Indicators  |  Test Stands  |  Systems & Kits  |  Grips & Attachments  |  Accessories  |  Software
Applications Gallery  |  Product Literature  |  
About Mark-10  |  Contact Us  |  Terms of Use