F755 / F755S / F1505 / F1505S
Tension / Compression Test Frames
Series F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.
Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.
Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.
Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.
Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.
Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.
- Optional Functions
- Optional Equipment
- In The Box
Rigid and precise by design
Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.006 in / 0.15 mm under any load, at any position.
Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
Most electronics are housed in an integrated module, easily replaced without special tools or processes.
The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including:
- Test to a load
- Test to a sample break
- Test to a distance
- Load holding
- Cycle testing
- Average force testing
View data in graphical format or results tables. Save or export data as needed, or generate a report.
What's your point of view?
Run a test via the Standard, Graph, or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples.
Test setup is easy as 1-2-3
Select a test type, and EasyMESUR® will guide you through the setup.
2. Results Settings
- Select results
- Enable and configure pass/fail limits
- Set data collection rate
- Set auto-return to home
Robust data acquisition and management
Force sensor sampling rate of 5,000 Hz yields accurate peak measurements even in quick-duration events. EasyMESUR® collects load and travel data at up to 100 Hz, and allows up to 100,000 data points per run.
Print or create a PDF report, including results, statistics, graph, system and user information, and comments.
Create report templates to save with future reports.
Save or export data
Automatically or manually save individual runs and results to a USB drive or file location of your choice. File names are automatically generated with the test name and time stamp, for quick searchability.
Results sets and data from individual runs may also be exported as .csv files.
Intelligent manual control
Manually control the test frame to obtain quick force and distance results, or manually position the crosshead prior to a test. Select from several actuation methods, including momentary (button-hold), maintained (button release) motion, jog mode with three distance presets, and FollowMe® force-based positioning.
Push and pull on the force sensor to move the crosshead. Apply greater load to achieve faster motion. FollowMe® is responsive enough for quick positioning as well as fine adjustments.
Calibrate force sensors on the test frame or off-site
Calibrate force sensors in one of two ways:
EasyMESUR® provides an integrated utility, with an intuitive step-by-step wizard. Manual controls allow the technician to use the test frame to apply tension and compression forces.
Conveniently remove the force sensors for off-site calibration with a Mark-10 Model M7I or M5I indicator (requires optional AC1083 adapter).
Secure user access
Control user access to sensitive areas, such as test editing and calibration, via password.
Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process.
A complete options package (EMP-COMP-2) is also available, including all of the below features at a discounted price.
The test stand is shipped in Demo Mode, during which time all available features are temporarily enabled for 160 hours of operation.
|Distance Measurement||EMF001-2||Measure distance, with the ability to zero the reading.||-|
|Distance Limits||EMF002-2||Stop at user-defined upper and lower distance limits.||- Distance Measurement (EMF001-2)|
|Preload||EMF003-2||Zero the travel position automatically at a user-defined preload value.||- Distance Measurement (EMF001-2)|
|High Speed Extension||EMF004-2||Extend the high end of the speed range.||-|
|Low Speed Extension||EMF005-2||Extend the low end of the speed range, dependent upon test frame model.||-|
|Cycling||EMF006-2||Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle between any combination of limit switches, travel limits, and load limits.||- If cycling to distance limits, add Distance Measurement (EMF001-2) and Distance Limits (EMF002-2)|
|Break Detection||EMF007-2||Stop when a user-defined drop in force occurs.||-|
|Load Holding||EMF008-2||Stop at, and maintain, a user-defined load for a specified period of time.||-|
|FollowMe®||EMF009-2||Push and pull on the sensor’s loading shaft to jog the crosshead up and down, ideal for manual positioning prior to a test. Speed increases with applied force.||-|
|Graphing & Reporting||EMF010-2||Graph load vs. time or distance, view statistics, and generate a report, including graph, results, run data, and other information.||- If graphing load vs. distance, add Distance Measurement (EMF001-1)|
|PC Control||EMF011-2||Control the test frame with your own application using a supplied library of motion control and data collection serial commands. While PC control is active, the control panel becomes a pendant, limited to basic, manual controls.||- AC1107 cable, test frame to PC|
Certificate of Calibration, Distance and Speed (CERT-DS)
NIST-traceable certificate of calibration includes 10 data points for distance and speed.
Series R07 force sensors
Series MR07 force sensors measure tension and compression forces, and are designed for Series F test frames. Capacities from 50 to 1,500 lbF (250 N to 7.5 kN).
Series FS05 force sensors
Requires an AC1083 adapter for use with F755, F755S, F1505, and F1505S Advanced Test Frames.
Measure tension and compression forces. Capacities from 0.12 to 500 lbF [0.5 to 2,500 N].
Cable, USB A to C, 6' (AC1116)
Connect the EasyMESUR control panel to a PC for file transfer.
Control panel tabletop mounting kit (AC1085)
For applications requiring remote use of the control panel. Features an adjustable viewing angle and a base with thru holes for bench mounting.
Shield (AC1092-1, AC1092-2)
Provides pinch and sample debris protection for the operator. Includesan electrical interlock, preventing test stand operation while the door is open.
Eye end adapters
Allow for quick grip installation and removal, and prevent grip rotation.
Mount to common test frames, load cells, and force gauges.
Third-party sensor adapter (PTAF)
Adapt a third-party party force sensor to Series F frames and Models M5I and M7I indicators.
|Load capacity*:||750 lbF
|Maximum travel:||32.0 in
|Standard speed range:||0.5 - 24 in/min
[10 - 600 mm/min]
|Optional speed range:||0.001 - 60 in/min
[0.02 - 1,525 mm/min]
|0.001 - 70 in/min
[0.02 - 1,800 mm/min]
(% of full scale)
|Load sampling rate:||5,000 Hz|
|Data acquisition rate:||100 Hz|
|Speed accuracy:||±0.2% of setting, virtually no variation with load|
|Position accuracy:||±0.006 in [0.15 mm], at any load or position|
|Distance resolution:||0.001 in [0.02 mm]|
|Limit switch repeatability:||±0.001 in [0.03 mm]|
|Overload protection:||Motor stops at 120% of full scale of the force sensor|
|Power:||Universal input 100-240 VAC, 50/60 Hz, 300W||Universal input 100-240 VAC, 50/60 Hz, 450W|
|Fuse type:||4A, 3AG, SLO BLO|
|Weight (test frame only):||184 lb
|Shipping weight:||235 lb
|Warranty:||3 years [see individual statement for further details]|
* Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
|Model No.||HS Code||ECCN||Country of Origin|
|F755-EM||50.85 [1291.6]||8.13 - 40.13 [206.4 - 1019.2]|
|F755S-EM||33.39 [848.1]||8.13 - 22.33 [206.4 - 567.1]|
|F1505-EM||51.35 [1304.3]||8.13 - 40.13 [206.4 - 1019.2]|
|F1505S-EM||33.89 [860.9]||8.13 - 22.33 [206.4 - 567.1]|
In The Box
The F755-EM, F755S-EM, F1505-EM, and F1505S-EM advanced test frames are shipped as shown at left, and includes the following accessories:
(1) Control panel, mounting bracket, and hardware
(1) Eye end kit for base
(2) Lock ring for eye end
(2) Spanner wrench
(1) Power cord
(1) Allen wrench set
|F755-EM||Test frame with EasyMESUR® control panel, vertical, 750 lbF / 3.4 kN, 110V*||$8,000.00|
|F755S-EM||Test frame with EasyMESUR® control panel, vertical, short, 750 lbF / 3.4 kN, 110V*||$7,500.00|
|F1505-EM||Test frame with EasyMESUR® control panel, vertical, 1,500 lbF / 6.7 kN, 110V*||$9,200.00|
|F1505S-EM||Test frame with EasyMESUR® control panel, vertical, short, 1,500 lbF / 6.7 kN, 110V*||$8,600.00|
|EMF004-2||High Speed Extension||$500.00|
|EMF005-2||Low Speed Extension||$500.00|
|EMF010-2||Graphing & Reporting||$1,400.00|
|Optional Function Packages|
|EMP001-2||Distance Measurement Package||$2,650.00|
|EMP002-2||Speed Extension Package||$950.00|
|EMP003-2||Advanced Functionality Package||$2,300.00|
|EMP-COMP-2||Complete Options Package||$8,500.00|
|Additional Items to Consider|
|AC1085||Control panel tabletop mounting kit||$200.00|
|AC1092-1||Shield, 51.9" height||$3,700.00|
|AC1092-2||Shield, 34.4" height||$2,730.00|
|CERT-DS||NIST-traceable certificate of calibration, distance and speed||$395.00|
* All test frame models contain a universal power supply (80 - 240V) and power cord with US prong style. Add suffix ‘E’ for European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F755-EME.