Advanced Motorized Torque Test Stand
Series TSTM-DC advanced motorized torque test stands are designed for a wide variety of applications, including closure torque testing, fastener torque testing, and more. Two torque capacities are available, 100 lbFin (11.5 Nm) and 200 lbFin (22 Nm).
The stands include a torque loading plate with tapped holes for grip and fixture mounting. Stepper motor design eliminates speed variation with load. A lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. A modular mechanical design allows the stand to be configured for a variety of applications.
The controller features an integrated angle display and output, programmable angle travel limits, PC control capability, programmable cycling, auto return, overload protection, password protection, and more.
- Maximum load
Standard: 100 lbFin [11.5 Nm]
Optional: 200 lbFin [22.0 Nm]
- Digital display of angle
- Programmable angle limits
- Angle dial with 2° resolution
- Computer Control
An RS-232 port is provided to interface with a PC. A command set is provided to allow for full control from a PC.
The following are required with PC control:
– Model 7i or 5i force/torque indicator (more info)
– 09-1162 multi-function cable (see below)
– 09-1056 serial cable (see below)
- Digital Angle Indication
Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data.
- Programmable Angle Limits
The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions.
- Overload Protection
Protects the torque sensor against overload (requires a Model 7i or 5i force/torque indicator and 09-1162 multi-function cable). The user programs the desired percentage of full scale of the sensor.
The torque table rotates to an angle limit or torque set point (requires a Model 7i or 5i force/torque indicator and 09-1162 cable), stops, and reverses direction at full speed to the other angle limit or torque set point.
- Cycling / Dwell Time
Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. Independent CW and CCW speeds may be programmed.
- Programmable Button Functions
Programmable CW and CCW button functions – momentary motion, maintained motion, or auto.
- Independent CW and CCW Speeds
Configurable speeds for CW and CCW directions
- Selectable speed units of measurement (RPM and °/s)
- Password protection
Prevents unauthorized changes to controller settings.
- Maximum torque
TSTM(H)-DC: 100 lbFin [11.5 Nm]
TSTM(H)-DC-1: 200 lbFin [22.0 Nm]1
- Speed range
TSTM(H)-DC: 0.01 – 15 RPM [0.05 – 90°/s]
TSTM(H)-DC-2: 0.04 – 60 RPM [0.2 – 360°/s]2
- Speed accuracy
±0.2% of setting, ±0% variation with load
- Rotational travel accuracy: ±0.7° / 0.02 revolutions
- Rotational travel repeatability: 0.1° / 0.01 revolutions
- Rotational travel resolution: 0.1° / 0.01 revolutions
- Throat: 4.10″ [104 mm]
- Manual adjustment: 12° / adjustment knob revolution
- Maximum slider travel: 15.5″ [394 mm]
- Slider travel rate: 1.047″ [26.6 mm] / lever revolution
- Universal power supply: 80-250 VAC
- CE mark
1. Maximum torque is proportional to speed. At 200 lbFin [22.0 Nm], the maximum speed is 7.5 RPM.
2. Maximum speed is proportional to torque. At 60 RPM, the maximum torque is 25 lbFin. [2.8 Nm].
The TSTM-DC and TSTMH-DC test stands are shipped as shown at left, and include the following accessories:(1) DC controller
(1) Controller connection cable
(1) Indicator mounting kit
(1) Encoder cable
(1) Column cap with hardware
(1) Allen wrench set
(4) Thumb screw for mounting indicator
(1) Power cord
(1) Base with hardware (TSTM-DC)
(2) Mounting leg with hardware (TSTMH-DC)
(1) Additional column cap with hardware (TSTMH-DC)
| Series R50 universal torque sensors|
Mount directly to the test stand. 6 capacities are available, from 10 ozFin to 100 lbFin [7 to 1,150 Ncm].
|Model MR55-200 torque sensor|
200 lbFin [22 Nm] capacity. Mounts with an optional adapter. Force/torque indicators
Displays the torque value measured by the R50 sensor. Select from several models.
MESUR®gauge software (15-1004)
Tabulates and plots load vs. time or load vs. travel. Also calculates statistics, exports to Excel, and more.
|Multi-function cable, gauge to controller |
Connects an indicator to the controller. This single cable is used to transmit set points, overload signals, and torque data.
|Serial cable, controller to PC|
For communicating with a PC for data output and PC control.
|RS-232 to USB adapter|
Converts RS-232 to USB output. Includes USB cable and installation CD.
|Horizontal / wall mounting kit|
Pair of mounting legs for adapting the test stand to a bench, instead of the base.
Select from several extension lengths. Extensions increase clearance between the torque sensor and torque mounting plate. See Ordering Information table.
Note: Column extensions do not increase travel distance.
|Grips and attachments|
For a variety of applications.
Allows for axial movement in threaded fasteners, bottle caps, and similar torque testing applications.
* Maximum torque decreases proportionately with speed. Examples:
– Maximum torque at 60 RPM = 25 lbFin [2.8 Nm]
– Maximum torque at 30 RPM = 50 lbFin [5.6 Nm]
|TSTM-DC||Torque stand, motorized, vertical, 110 V*||$7,450.00|
|TSTMH-DC||Torque stand, motorized, horizontal, 110V*||$7,450.00|
|TSTM-DC-1 **||Torque stand, motorized, vertical, 200 lbFin, 110V *||$8,250.00|
|TSTMH-DC-1 **||Torque stand, motorized, horizontal, 200 lbFin, 110V *||$8,250.00|
|TSTM-DC-2 **||Torque stand, motorized, vertical, 60 RPM max, 100 lbFin, 110V *||$8,050.00|
|TSTMH-DC-2 **||Torque stand, motorized, horizontal, 60 RPM max, 100 lbFin, 110V *||$8,050.00|
|Additional Items To Consider|
|09-1162||Multi-function cable, 7i/5i indicator to test stand||$125.00|
|09-1056||Serial cable, test stand to PC||$30.00|
|RSU100||Communication adapter, RS-232 to USB||$125.00|
|TSF002||Horiz. / wall mounting kit||$200.00|
|AC1016||Mounting adapter, MR55-200 to test stand||$60.00|
|09-1089-1||Power cord, 110V US (included with TSTM-DC)||$30.00|
|09-1089-2||Power cord, 220V EUR (included with TSTM-DCE)||$30.00|
|09-1089-3||Power cord, 220V UK (included with TSTM-DCU)||$30.00|
|09-1089-4||Power cord, 220V AUS (included with TSTM-DCA)||$30.00|
|SP-2736-12||Column extension, 12 in. / 305 mm||$325.00|
|SP-2736-24||Column extension, 24 in. / 610 mm||$500.00|
|SP-2736-42||Column extension, 42 in. / 1065 mm||$775.00|
|SP-2496||Upgrade to 200 lbFin, factory retrofit||$800.00|
|SP-2624||Upgrade to 60 RPM, factory retrofit||$600.00|
* The TSTM-DC contains a universal power supply (80 – 240V) and includes a 110V US power cord. Add suffix ‘E’ for Euro cord, ‘U’ for UK cord, or ‘A’ for Australian cord.
Ex: TSTM-DCE, TSTM-DCU, TSTMH-DCA
Power cords also available for purchase individually.
** Model TSTM-DC-1 replaces models TSTM-DC and SP-2496
Model TSTMH-DC-1 replaces models TSTMH-DC and SP-2496
Model TSTM-DC-2 replaces models TSTM-DC and SP-2624
Model TSTMH-DC-2 replaces models TSTMH-DC and SP-2624